DO IT IN COMPOSITE

TELESCOPIC MASTS

Glass / carbon fiber tactical masts – Solutions for specific lifting

Specific mechanical characteristics / Lightness / Economical

SOLUTION FOR GREAT-HEIGHT PRUNING

Located in the Isère region, the Eliatis company and Plasticon Composites France have developed a triple telescopic mast made of fiberglass / epoxide matrix. Thanks to its hydraulic engine, the mast spreads out over 23 m, which enables the activation of a 700-mm-in-diameter saw blade at its end.

Road-approved, this machine makes it possible to prune with complete safety, in forest areas, notably along high-voltage power lines (insulating characteristic of the composite mast). The « Alti-coup » system is a registered trademark sold around the world by the Eliatis company.

Mechanical characteristics of the epoxy resin :

-Density : 1200 kg/m3

-Elastic modulus : 3200 MPa.

-Poisson’s ratio : 0.37

-Compression resistance : 120 MPa.

-Traction resistance: 74 MPa.

-Shearing resistance : 43 MPa.

 

Mechanical characteristics of the E-Glass fiber :

-Density : 2600 kg/m3

-Elastic modulus : 73000 MPa.

-Poisson’s ratio : 0.22

-Compression resistance : 1155 MPa.

-Traction resistance: : 1916 MPa.

-Shearing resistance : 1155 MPa.

GLASS / CARBON FIBER MILITARY TACTICAL MAST

Non-magnetism / Economical / Cost-weight ratio / Specific mechanical characteristics.

Mast composed of 12 telescopic tubes of variable length and a 3-mm thickness, carbon-fiber-epoxy-resin made. The mast is locked in place by means of aluminium clamping clips.

Height when spread out = 18 000 mm

Height when retracted = 2500 mm

Locked in place by means of aluminium clamping clips

The mast is shrouded on 3 levels by a total of 9 cables.

A project, a request for an estimate, a question, write to us !

By submitting this form, I agree that my information will be used in accordance with my information request and the commercial relationship that could result from it. I have read and I accept the privacy policy of this website.

5 + 10 =